How To Set Up Dish Box To Tv

How to Program a DISH Remote

We've researched how to plan your DISH universal remote to command your unabridged home theater—not merely your DISH stuff.

If you're looking to plan your DISH remote or reset your remote's controls, you've come to the right place. Nosotros've used and researched the DISH remote for hundreds of hours, and so we can help get yous clickin' in no fourth dimension.

Programming your DISH remote

There are ii basic processes yous'll use to program your DISH remote, depending on the model you have.

The process below works to program DISH remote models twoscore.0, fifty.0, 52.0, and 54.0, which is basically all of them from the last several years, including the DISH Vocalization Remote. If y'all have an older model from the xx or 21 serial, use these other steps beneath.

Not sure which model you take? The easiest way is to compare yours with these images.

Pro tip: All the deportment nosotros describe in our steps are performed on your DISH remote unless otherwise noted. No need to mess with whatever other remotes or fiddle with your devices. We similar to continue information technology simple effectually here.

How to program newer DISH remote controls

1. Press the Home button on your DISH remote twice. If your remote is model 40.0, which lacks a Home push button, printing the Bill of fare push button once instead.
2. Select Settings from the on-screen carte du jour.
3. Select Remote Control from the on-screen bill of fare.
4. Use the on-screen menu to select the device yous want to pair.
5. Select the Pairing Wizard option from the menu. Of the choices, the wizard is the easiest considering it guides you through the process.
6. Scroll through the on-screen menu to observe the brand of the Idiot box or other device you're pairing. It's of import that you cull the right brand because the process the pairing wizard walks you through involves testing pairing codes, and these are unlike for each brand.
7. ​​​​​​​The pairing wizard will now walk you through testing a series of device codes for the device yous want to pair. Follow the on-screen instructions to test each lawmaking. For most devices, this involves pressing either the Volume or Ability buttons on the DISH remote to see if anything happens. If the lawmaking works, select Finish on the screen. If it doesn't, select Endeavour Next Code and repeat the procedure.
8. Examination your DISH remote thoroughly. ​​​​​​​Even if the pairing process worked, it'due south possible things won't part as expected. This is especially truthful if your device has a lot of unique or specialized features. Exam your remote now and so you lot know it'll work in the middle of the big game or a tense movie scene.

If everything works as expected, congrats! Just repeat the above process for all the devices y'all want to pair with your remote.

If you do encounter a problem, you lot can run through the procedure again—and try a different code. Frequently there are multiple codes to plan your DISH remote to your Tv set model.

How to program older DISH remote controls

If you lot have an older remote control from the 20 or 21 series, you'll have to follow a different process called a power scan.

A power scan fires off device codes until it finds 1 that works. Here are the steps for programming an older DISH remote control using the power browse:

1. Bespeak your DISH remote at the device you want to pair.
2. Printing and hold the push button on the DISH remote that corresponds to the device you want to program (Idiot box, DVD, or AUX). Later on nigh 10 seconds, you should encounter all four Way buttons light up. When they do, release the button and it will start blinking.
3. Press and release the Power button on the DISH remote. The blinking Mode button should now exist a solid light. This means the DISH remote is ready to programme.
4. Press the Upwards directional button on your DISH remote to send the first code.
5. Keep pressing the Up button every few seconds until the device turns off. Once the device has turned off, you lot know you've found the right lawmaking.
6. Press the # button (that'due south pound, non hashtag!) to relieve the code to retention. The Mode button should glimmer several times.
7. Test your DISH remote. Now yous desire to test the remote control to make certain everything works equally expected. Better to test information technology now than to find out something isn't working in the middle of your favorite sitcom.

If everything works, congratulations, friend. You're all set. Repeat this process for any other devices you want to program to your DISH remote, and you're good to go.

And that'southward it! You lot should now be ready up to control your set-top boxes or Hopper 3 DVR, along with your TV, sound arrangement, and other devices—all with one remote.

At present but boot back, relax, and enjoy all that not bad DISH programming.

How to program a DISH remote FAQ

How practise I know which model of DISH remote I have?

Good question. One manner to find out is to check the documentation that came with your equipment, but if you've thrown that out (similar anybody else), you can compare it to the images on the DISH website.

Each remote is pretty singled-out in advent, so it should be easy enough to determine which ane you're working with.

How do I pair my DISH remote with a Hopper or Joey DVR?

Your installation tech should have programmed your DISH remote for your set-top boxes already, just if y'all're having problems or need to pair a new remote with your Hopper 3 DVR or Joey, follow these instructions:

1. Press the Organization Info push button on the front end console of your Hopper 3 or Joey.
2. Press the Sat button on the front or side of your DISH remote. The exact location of the button depends on the model yous have, only it'due south in one of these 2 places.
3. Printing the Cancel or Back push on the front of your DISH remote. The system info screen should disappear from your TV—this lets you know the pairing process worked.

How practice I reset my DISH Network remote?

You tin't technically "reset" your DISH Network remote, but you can "re-link" information technology to your receiver. Hither's how ya do it:

1. Press SAT on your remote.
2. Press System Info on the receiver.
3. Press SAT once more on your remote.

Will DISH supervene upon my remote for free?

It commonly depends if your DISH remote falls under warranty or not. You tin can always try your luck past visiting DISH's customer support page and asking for a replacement.

How do I program my DISH remote without a lawmaking?

If you lot have a newer DISH remote, you may not need a code—the Pairing Wizard process will aid you observe the Television receiver code you demand. But follow these directions and you should be good. Simply don't be surprised if you lot accept to test a few different codes before you lot find the right one.

If the Pairing Sorcerer doesn't work for yous, follow the instructions for older DISH remotes—the Ability Scan step will help you find the correct code for your Television.

Why is my DISH TV remote volume not working?

Try showtime pushing the "Tv" button, located on the side of your DISH remote control. This should switch your remote over to using Goggle box control functions, like the volume buttons.

Source: https://www.cabletv.com/blog/how-to-program-dish-remote

Share this post